Robot And Advance Steel From Scratch(Under Construction)

[Srbija]

Robot And Advance Steel From Scratch(Under Construction)
Last updated 10/2020
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 5.03 GB | Duration: 8h 48m

Robot and Advance Steel from Zero



What you'll learn
Warehouse Modeling in Robot structural analysis
Design of all elements of warehouse
wind load Simulation
Connections Design
Portal frame Design
Advance Steel Basics
Elements Modeling
Connections Modeling
Numbering
Drawings

Requirements
basic knowledge of structural Engineering

Description
Robot structural Analysis In this course, you will learn how to model and analyze and design a steel warehouse from scratch using Eurocode. you will learn how to design all elements (columns, rafters, bracing, wind columns, side rails, purlins...) you will learn how to draw the cladding, assign loads and generate wind loads. you will learn how to design connectionsBeam - beam connectionbeam - column connectionbase connection. In this Course you will learn how to use the Advance steel program perfectly. 1-Grids creation and editing by many methods. 2-Elements Modeling (Column,beam,Welded, double sections, Folded beam, tapered , Aluminum Section and others) 3-plates Creation and editing. 4-Extended Elements (Portal frame, mono-pitch frame, bracing, purlins and Truss) 5-Connections (Anchor, holes, shear studs) Base plate Connection, Frame knee connection, Apex haunch, Clip Angle, Gusset plate at one diagonal, Gusset plate in center, 4 diagonals connection, Purlin connection, purlin connection with plate, Two purlins with bolts, Vertical purlin plate,Double purlin splice plate6-Numbering 7-GA and assembly Drawing. 8-Assembly list.

Overview

Section 1: Introduction

Lecture 1 Overview

Lecture 2 Preferences

Lecture 3 Job preferences

Section 2: Modeling

Lecture 4 Axis Definition

Lecture 5 Bar Section Definition

Lecture 6 View

Lecture 7 Columns modeling

Lecture 8 Columns Grouping

Lecture 9 Rafters

Lecture 10 Wind Columns

Lecture 11 Side Rails

Lecture 12 Side Rails Grouping

Lecture 13 Eave Beams

Lecture 14 Purlins

Lecture 15 Bracing

Lecture 16 Claddings

Section 3: Loads

Lecture 17 Loads Definition

Lecture 18 Wind load simulation

Lecture 19 Release

Lecture 20 Bracings (Axial forces Act)

Lecture 21 Claddings Loads distribution

Lecture 22 Supports

Section 4: Analysis

Lecture 23 Analysis

Lecture 24 Results

Lecture 25 Combinations

Section 5: Elements Designing

Lecture 26 Side Rails

Lecture 27 Purlins

Lecture 28 Eave Beams

Lecture 29 Wind Columns

Lecture 30 Bracings

Lecture 31 Rafters

Lecture 32 Fly Bracings

Lecture 33 Columns

Section 6: Connections

Lecture 34 Base Connection

Lecture 35 Frame Knee Connection

Lecture 36 Beam-beam connection

Section 7: Advance Steel Introduction

Lecture 37 Overview

Lecture 38 Draw

Lecture 39 Building Grid

Lecture 40 Axis

Lecture 41 Grid with groups By distance

Lecture 42 Grids Editing

Section 8: Column and Beam Modeling

Lecture 43 Column modeling

Lecture 44 Visual styles

Lecture 45 Rolled Sections

Lecture 46 Welded Beams

Lecture 47 Double Sections

Lecture 48 Continuous Beam

Lecture 49 Beams from line and polyline

Lecture 50 Split and merge

Lecture 51 Curved beam

Lecture 52 Disassemble Compound Section

Lecture 53 Folded Beam

Lecture 54 Tapered Section

Lecture 55 Generic Aluminium Section

Lecture 56 Display and View

Section 9: Plates

Lecture 57 Plates Creation

Lecture 58 Plate Editing

Section 10: Extended Modeling

Lecture 59 Portal Frame

Lecture 60 Mono-Pitch Frame

Lecture 61 Bracing

Lecture 62 Purlins

Lecture 63 Truss

Section 11: Connections

Lecture 64 Connections

Lecture 65 Anchor

Lecture 66 Holes

Lecture 67 Shear Studs

Lecture 68 Base plate connection

Lecture 69 Connection vault (Base plate)

Lecture 70 Frame Knee Connection

Lecture 71 Apex Haunch

Lecture 72 Connection saving

Lecture 73 Clip Angle

Lecture 74 Gusset plate at one diagonal

Lecture 75 Gusset plate in Center

Lecture 76 4 Diagonals, middle gusset plate

Lecture 77 Purlin Connection

Lecture 78 Purlin Connection with plate

Lecture 79 Two purlins with bolts

Lecture 80 Vertical Purlin Plate

Lecture 81 Double Purlin Splice Plate

Section 12: Numbering

Lecture 82 Numbering

Lecture 83 Prefix

Lecture 84 Single,Main Part and Assembly

Lecture 85 Numbering Methods

Lecture 86 Checking

Lecture 87 Main Part Creation

Lecture 88 Assembly Selection and Isolation

Section 13: Drawing

Lecture 89 Drawing Styles

Lecture 90 GA plan,elevation and detail

Lecture 91 Assemblies Drawing

Lecture 92 Sp Drawing

Lecture 93 Assembly List

Section 14: Robot Model

Lecture 94 Export Robot file

Lecture 95 Importing

Lecture 96 Base plate Connection

Lecture 97 Base Plate Fixing

Lecture 98 Frame Knee Connection

Lecture 99 Frame Knee Connection copying

Section 15: Bonus

Lecture 100 Get Any course for up to 90% off

Civil and Mechanical engineering students,Civil and Mechanical engineers

Homepage

Hidden Content

Give reaction to this post to see the hidden content.

Hidden Content

Give reaction to this post to see the hidden content.

Hidden Content

Give reaction to this post to see the hidden content.

Hidden Content

Give reaction to this post to see the hidden content.